Diseño de un sistema de distribución de agua para consumo humano en Sumaco-Cantón Quijos, Provincia de Napo
Para citar o enlazar este item, por favor use el siguiente identificador:
http://dspace.ups.edu.ec/handle/123456789/9246
Título : | Diseño de un sistema de distribución de agua para consumo humano en Sumaco-Cantón Quijos, Provincia de Napo |
Autor : | Bautista Barrera, Ángel Fernando Samaniego Parra, Pedro Fernando |
Director de Tesis: | Pérez Silva, José Olger |
Resumen traducido: | The purpose of this project is to design a system of safe water distribution in Sumaco- Quijos-Napo. Which has four chapters distributed in the following way: In the chapter one, there is a short description about the geographical location and characteristics of Sumaco parrish. Then it has the general statements about the system of safe water distribution. In the chapter two, some alternatives, based in the type of system of safe wáter distribution, the types of piping installation, types of tanks and types of system are planted. Which with the best valuation are chosen; taking into account cost, security, contamination, and the facilities of construction. The chapter three has two sections. The first part has a design of a system of safe water distribution by gravity with 1063 meters length, a system of distribution by closed branches with 379.21 meters length and a tank distribution of 15 cubic meters. The second section consist of waterworks such as: a wet pick box and a disinfection system. This system will provide service to twenty two families and it will be designed to get a life time of twenty years. In the chapter four a detailed budget of each ítems and materials are done, that will have to satisfy the economical needs of public institutions, which will finance its construction in the future. |
Resumen : | El presente proyecto de graduación tiene como finalidad diseñar un sistema de distribución de agua para consumo humano en Sumaco – Quijos – Napo. El cual está constituido por cuatro capítulos distribuidos de la siguiente manera: En el capítulo uno se inicia con una breve descripción de la ubicación geográfica y características de la parroquia de Sumaco. A continuación consta de las generalidades de las cuales está compuesto un sistema de distribución de agua potable. En el capítulo dos se plantea alternativas, basadas en el tipo de sistema de distribución de agua, tipos e instalación de la tubería, tipos de tanques y el tipo de red de distribución, de las cuales se escogen las que tienen su mejor valoración, teniendo en cuenta el costo, seguridad, contaminación y la facilidad de construcción del presente diseño. En el capítulo tres consiste en primer lugar en el diseño de un sistema de distribución de agua potable por gravedad con una longitud de 1063.33 m y red de distribución por ramales cerrados con una longitud de 379.21 m, y un tanque de distribución de 15 m³. En segundo lugar consta de obras hidráulicas como: caja húmeda de captación y un sistema de desinfección. Este sistema brindará servicio a 22 familias y será proyectada para una vida útil de 20 años. En el capítulo cuatro se realiza el presupuesto detallado de cada uno de los rubros y materiales, los cuales tendrán que satisfacer las necesidades económicas las instituciones públicas que lo financiarán para su construcción a futuro. |
Palabras clave : | MECÁNICA INGENIERÍA HIDRÁULICA DISTRIBUCIÓN DE AGUA ABASTECIMIENTO DE AGUA - NAPO AGUA POTABLE |
Fecha de publicación : | mar-2015 |
URI : | https://dspace.ups.edu.ec/handle/123456789/9246 |
Idioma: | spa |
Pertenece a las colecciones: | Grado |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
UPS-KT01152.pdf | Texto completo | 4,91 MB | Adobe PDF | Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons