“Efecto de fibras naturales de Carludovica palmata (paja toquilla) en resistencia a compresión y flexión en hormigones simples de 21 MPA.”

Para citar o enlazar este item, por favor use el siguiente identificador: http://dspace.ups.edu.ec/handle/123456789/20267
Title: “Efecto de fibras naturales de Carludovica palmata (paja toquilla) en resistencia a compresión y flexión en hormigones simples de 21 MPA.”
Authors: Bastidas Ñacato, Edwin Darío
Verdezoto Borja, Jairo Mauricio
Advisor: Altamirano León, Byron Iván
Abstract: The purpose of the article presented was to show the mechanical behavior both in compression and bending of concrete when applying different percentages of natural fibers of toquilla straw (carludovica palmata), a plant well known around the world for its Panama hats and which is found in abundance in Ecuador, being feasible its acquisition for free production, resulting in an attractive alternative to usual fibers. A purely experimental methodology was applied, starting from a simple concrete, to which different percentages of the vegetable fiber were incorporated, it is necessary to clarify that these percentages are a function of the total mass of the concrete mixture. A close relationship was established between the percentage of fiber and the increase of the mechanical properties analyzed, giving a peak increase at 0.2% of fiber and decreasing after this. From the same data obtained, a correlation of compressive strength and modulus of rupture was elaborated in the form of an equation, which represents the behavior of the concrete when only compressive strength data is available. By means of the analyses carried out, it was possible to conclude that the vegetable fiber works better for flexural tests, although it also contributes to compression, but on a smaller scale.
Translated abstract: El artículo presentado tuvo como fin dar a conocer el comportamiento mecánico tanto a compresión como a flexión del hormigón al aplicar diversos porcentajes de fibras naturales de paja toquilla (carludovica palmata), planta muy conocida alrededor del mundo por los sombreros de Panamá y que se encuentra en abundancia en Ecuador, siendo factible su adquisición para libre producción, resultando una alternativa atractiva a fibras habituales. Se aplicó una metodología netamente experimental, partiendo de un hormigón simple, al mismo que se le incorporó distintos porcentajes de la fibra vegetal, es necesario aclarar que dichos porcentajes están en función a la masa total de la mezcla de hormigón. Se estableció una estrecha relación entre el porcentaje de fibra y el aumento de las propiedades mecánicas analizadas, dando un incremento pico al 0.2% de fibra y decreciendo luego de esta. A partir de los mismos datos conseguidos se elaboró una correlación de la resistencia a la compresión y el módulo de rotura en forma de ecuación, la misma que representa el comportamiento del hormigón al tener únicamente datos de resistencia a compresión. Por medio de los análisis realizados se logró concluir que la fibra vegetal trabaja de mejor manera para ensayos a flexión, aunque también aporta a la compresión, pero a menor escala.
Keywords: INGENIERÍA CIVIL
CIENCIA DE LOS MATERIALES
RESISTENCIA DE MATERIALES
FIBRAS VEGETALES
MATERIALES COMPUESTOS
HORMIGÓN
Issue Date: May-2021
URI: http://dspace.ups.edu.ec/handle/123456789/20267
Language: spa
Appears in Collections:Grado

Files in This Item:
File Description SizeFormat 
UPS - TTS359.pdfTexto completo507,4 kBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons