Análisis de la influencia de los tratamientos térmicos (recocido y revenido), en las propiedades mecánicas de la aleación de aluminio 7075-T651 mediante ensayos de tracción.
Para citar o enlazar este item, por favor use el siguiente identificador:
http://dspace.ups.edu.ec/handle/123456789/17680
Título : | Análisis de la influencia de los tratamientos térmicos (recocido y revenido), en las propiedades mecánicas de la aleación de aluminio 7075-T651 mediante ensayos de tracción. |
Autor : | Calderón Centeno, Luis Rafael Morillo Ortega, Gary Francisco |
Director de Tesis: | Jami Lema, Milton Salomón |
Resumen traducido: | In Ecuador, one of the problems in the national industry is the lack of general knowledge about the 7075-T651 aluminum alloy. This type of material has not been used in the national environment for more than three decades, and distribution companies have a lack of knowledge of the possible applications for this aluminum alloy. Therefore; the following technical project will provide in detail the mechanical characteristics of this material, and will demonstrate the application of the thermal treatments of annealing and tempering of it, with the implementation of different types of tests such as: traction, metallography and hardness. Different data will be obtained and analyzed in order to determine if there is an overall improvement for this material, this way we can determine the possible applications in the industrial environment. For this reason, the 7075-T651 aluminum alloy specimens, submitted to a tempering process of six hours in the oven at a temperature of 120 ° C and then cooled to room temperature, demonstrated that positive as well as negative results were obtained. In which it will be detailed in this investigation in relation to the data obtained from the base material |
Resumen : | En el Ecuador, uno de los problemas en la industria nacional es la falta conocimiento general sobre la aleación de aluminio 7075-T651. Este tipo de material no lleva más de tres décadas de uso en el medio nacional, por lo tanto, las empresas distribuidoras tienen un desconocimiento de las posibles aplicaciones que se podrían obtener con esta aleación. De esta manera; con el siguiente proyecto técnico se proporcionará en detalle las características mecánicas de este material y seguidamente aplicando los tratamientos térmicos de recocido y revenido a probetas de este aluminio, que después serán intervenidos por diferentes tipos de ensayo como son: tracción, metalografía y dureza. Se obtendrán diferentes datos que serán analizados para poder identificar si existe una mejora en general a este material y de esta forma determinar las posibles aplicaciones en el medio industrial. Por este motivo, los ejemplares de aleación de aluminio 7075-T651 sometidos al proceso de revenido con un tiempo de residencia en el horno de 6 horas a una temperatura de 120°C y enfriados a temperatura ambiente, mostrarán que una vez concluidos los ensayos se logrará obtener resultados positivos, como también resultados no favorables, los cuales se detallarán posteriormente en está investigación con relación a los datos obtenidos del material base. |
Palabras clave : | INGENIERÍA MECÁNICA TRATAMIENTO TÉRMICO DE LOS METALES ALEACIONES DE ALUMINIO ENSAYOS (TECNOLOGÍA) TRACCIÓN ARMÓNICA |
Fecha de publicación : | ago-2019 |
URI : | https://dspace.ups.edu.ec/handle/123456789/17680 |
Idioma: | spa |
Pertenece a las colecciones: | Grado |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
UPS - ST004263.pdf | Texto completo | 3,81 MB | Adobe PDF | Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons