Análisis de eficiencia espectral en la banda LTE para la inclusión de señales 5G usando GFDM

Para citar o enlazar este item, por favor use el siguiente identificador: http://dspace.ups.edu.ec/handle/123456789/17549
Título : Análisis de eficiencia espectral en la banda LTE para la inclusión de señales 5G usando GFDM
Autor : Ayala Vera, Oscar Roberto
Vallejo Ortega, Paúl Giovanny
Director de Tesis: Aucatoma Guamán, Lenin Wladimir
Resumen traducido: The purpose of this article is to analyze the spectrum in the LTE band of Ecuador to determine which frequency spaces are not being used and to introduce some 5G characteristic signals (high speed and low latency), through the GFDM medium access technique (Multiplexing by Generalized Frequency Division) using a USRP 2944R (software defined radio) and LabVIEW Communications System Design. In the first instance a state of the art was made and it was understood what are the parameters established by the ITU (International Telecommunication Union) for the NGN (New Generation Networks), and the necessary configurations for a correct functioning of the transceiver in the free frequency 2.16GHz belonging to the K' block of the radio spectrum assigned by the ARCOTEL. MP4 video was transmitted via UDP to LabVIEW implementing various Tx speeds and different video qualities, reaching up to 3 Gbps as maximum speed, the best results were obtained by implementing a speed of 925.2 Mbps with a resolution of 1920x1080 pixels, that is, at a quality of 1080p and a BW of 10 MHz, thus obtaining a BER value in the order of 10^-3.
Resumen : El presente artículo tiene como finalidad el análisis del espectro en la banda LTE del Ecuador para determinar qué espacios de frecuencias no están siendo utilizados e introducir algunas señales con características 5G (alta velocidad y baja latencia), mediante la técnica de acceso al medio GFDM (Multiplexación por División de Frecuencia Generalizado) usando un USRP 2944R (radio definido por software) y LabVIEW Communications System Design. En primera instancia se realizó un estado del arte y se comprendió cuáles son los parámetros establecidos por la UIT (Unión Internacional de Telecomunicaciones) para las NGN (Redes de Nueva Generación), y las configuraciones necesarias para un funcionamiento correcto del transceptor en la frecuencia libre de los 2.16GHz perteneciente al bloque K´ del espectro radioeléctrico asignado por la ARCOTEL. Se transmitió video MP4 vía UDP hacia LabVIEW implementando varias velocidades de Tx y diferentes calidades de video, llegando hasta los 3 Gbps como velocidad máxima. Los mejores resultados se obtuvieron implementando una velocidad de 925,2 Mbps con una resolución de 1920x1080 pixeles; es decir, a una calidad de 1080p y un BW de 10 MHz, obteniendo así un valor del BER en el orden de 10^-3.
Palabras clave : INGENIERÍA ELECTRÓNICA
ANÁLISIS DE SISTEMAS
MODULACIÓN DIGITAL
MODULACIÓN (ELECTRÓNICA)
TELECOMUNICACIONES
Fecha de publicación : jul-2019
URI : https://dspace.ups.edu.ec/handle/123456789/17549
Idioma: spa
Pertenece a las colecciones: Grado

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UPS - ST004143.pdfTexto completo813,35 kBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons