Diseño de la red de distribución eléctrica del Barrio La Gazota Parroquia Chillogallo

Para citar o enlazar este item, por favor use el siguiente identificador: http://dspace.ups.edu.ec/handle/123456789/6549
Título : Diseño de la red de distribución eléctrica del Barrio La Gazota Parroquia Chillogallo
Autor : Basantes Tituaña, Manolo Guillermo
Director de Tesis: Santos Narváez, Benigno Ignacio
Resumen traducido: El presente trabajo propone determinar los diseños óptimos de construcción para Redes Aéreas Primarias, Secundarias, Conjunto de Transformadores de Distribución, Elementos de Protección y Seccionamiento que satisfagan la carga instalada manteniendo estándares de calidad y de esta manera mejorar el suministro de energía eléctrica a los moradores. Se propone dos tipos de diseño de redes de distribución las cuales trabajaran bajo parámetros técnicos, como regulación de voltaje, capacidad máxima de conductores, capacidad de los Transformadores de Distribución, capacidad de los Elementos de Protección y Seccionamiento. Se determinara el usuario tipo para obtener la demanda requerida y se realizará los cálculos pertinentes para las caídas de voltaje en los diferentes circuitos para comprobar que no se excedan de los rangos establecidos por las normas de la EEQSA , caso contrario se volverá a rediseñar los circuitos hasta obtener la solución adecuada . Mediante los datos obtenidos anteriormente se dibujará los diferentes planos de diseño tanto como para Red de Media Tensión, Red de Baja Tensión y Alumbrado Público. Se procederá a realizar un estudio de las estructuras que serán utilizadas en el diseño del proyecto al igual que sus costos, junto con los costos de los Transformadores de Distribución, Elementos de Protección, Seccionamiento y mano de obra para de esta manera ir elaborando el presupuesto de diseño y lista de materiales . Finalmente se obtienen los resultados que van hacer analizados en diferentes aspectos de factibilidad y probabilidad.
Resumen : This work aims to determine the optimal designs of building of Primary, Secondary Area Networks, contiguous Distribution Transformers, Elements of Protection and sections satisfy the burden installed to maintain quality standards and this way improve the electricity supply to the residents. It is proposed to design two types of distribution networks which work under technical parameters such as voltage regulation, conductors of maximum capacity, the capacity of distribution transformers, capacity of the Elements of Protection and Sections. The user type is determined to obtain the required demand and carry out the relevant calculations for voltage drops in the different circuits to verify that they are not exceeded the ranges set by the rules of the EEQSA, otherwise will be redesign circuits until to get the correct solution. By the data obtained above are draw different design for as much as Medium Voltage Network ,Low Voltage Network and Public Lighting. Will be studing of the structures that will be used in the project design as well as its costs together with costs of Distribution Transformers, Elements of Protection, Sections and handwork to be developed in this way the budget and design list materials. Finally to get the results that will make analyzed in different aspects of feasibility and probability.
Palabras clave : ELÉCTRICA
DISTRIBUCIÓN DE ENERGÍA ELÉCTRICA
REDES ELÉCTRICAS
LÍNEAS ELÉCTRICAS
CONDUCTOS ELÉCTRICOS
Fecha de publicación : ene-2009
URI : https://dspace.ups.edu.ec/handle/123456789/6549
Idioma: spa
Pertenece a las colecciones: Grado

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UPS-KT00314.pdf209,58 kBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons