Diseño y construcción de un sistema modular flexible de clasificación de piezas con PLC´S SIMATIC (Siemens), para el aprendizaje de automatización industrial.
Para citar o enlazar este item, por favor use el siguiente identificador:
http://dspace.ups.edu.ec/handle/123456789/5784
Título : | Diseño y construcción de un sistema modular flexible de clasificación de piezas con PLC´S SIMATIC (Siemens), para el aprendizaje de automatización industrial. |
Autor : | López Ortiz, Ronald Ismael Masabanda Pinza, Jhony Javier |
Director de Tesis: | Celi Sánchez, Carmen Johanna |
Resumen traducido: | This project describes the design and construction of a flexible modular system of classification of pieces using two PLC Simatic S7-200 (Siemens), CPU 222, for industrial automation learning. Chapter 1: chapter one discusses the objectives to be met and their justification. Chapter 2: in chapter two discusses the theoretical part, the fundamentals that are used for the realization of the project from the PLC's used, actuators and sensors used. Chapter 3: the third chapter covers all mechanical and electrical design of the training module, their individual stations and communication established between the two PLC’s. Chapter 4: chapter four refers to tests conducted in the training module through a DEMO that includes all the functions that can be developed, and their respective safety recommendations. Finally there are the conclusions and recommendations on the training module. |
Resumen : | Este proyecto describe el diseño y construcción de un sistema modular flexible de clasificación de piezas utilizando dos PLC’s Simatic S7-200 (Siemens), de CPU 222, para el aprendizaje de automatización industrial. Capítulo 1: trata sobre los objetivos a cumplir y su justificación. Capítulo 2: analiza la parte teórica, los fundamentos que se emplean para la realización del proyecto, desde los PLC’s utilizados, actuadores y sensores empleados. Capítulo 3: abarca todo el diseño mecánico y eléctrico del módulo didáctico, sus estaciones individuales y la comunicación que se establece entre los dos autómatas programables. Capítulo 4: se refiere a las pruebas realizadas en el módulo didáctico mediante un DEMO que abarca todas las funciones que se pueden desarrollar, y sus respectivas recomendaciones de seguridad. Finalmente están las conclusiones y recomendaciones sobre el módulo didáctico. |
Palabras clave : | INGENIERÍA ELECTRÓNICA DISEÑO EN INGENIERÍA MÁQUINAS CLASIFICACIÓN SENSORES ACTUADORES SOFTWARE LIBRE AUTOMATIZACIÓN INDUSTRIAL |
Fecha de publicación : | dic-2013 |
URI : | https://dspace.ups.edu.ec/handle/123456789/5784 |
Idioma: | spa |
Pertenece a las colecciones: | Grado |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
UPS - ST001060.pdf | Texto completo | 4,84 MB | Adobe PDF | Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons