Diseño y construcción de motocultor con una potencia de 6.5 hp, para la estación de investigación de la Universidad Politécnica Salesiana, ubicada en la ciudad de Cayambe – Ecuador
Para citar o enlazar este item, por favor use el siguiente identificador:
http://dspace.ups.edu.ec/handle/123456789/23294
Título : | Diseño y construcción de motocultor con una potencia de 6.5 hp, para la estación de investigación de la Universidad Politécnica Salesiana, ubicada en la ciudad de Cayambe – Ecuador |
Autor : | Lucero Zambrano, Anghy Alejandra Tipán Pallo, Edwin Xavier |
Director de Tesis: | Jami Lema, Milton Salomón |
Resumen traducido: | The project title have main objective to design and build a motor-cultivator, able to removing undergrowth and disassemble the land for cultivation, It has been made an investigative analysis of the agricultural zone where will it be put into operation the machine, which doesn’t have tools or implements for the plow. Through the analysis of parameters the required needs are established for design a motor-cultivator with the suitable tool. Through a comparative bibliographical investigation between tools such as: rotary implement, groove and disc plow, and the select the most viable alternative that will result in a complete and efficient work to the tillage problems to the farmer. The respective were executed for the selection of each element with the through the analysis static and dynamic with the Autodesk Inventor software was built a prototype that through field tests we get as a result, the reduction of manual work, contributes as well as benefit, an optimization of time and money. |
Resumen : | El presente proyecto de titulación posee como principal objetivo, diseñar y construir un motocultor, capaz de retirar maleza y desmontar la tierra para el cultivo. Mediante el estudio de la zona agrícola donde se va a poner en funcionamiento la máquina, donde se determinó que no poseen herramientas o implementos para el arado. Mediante el análisis de parámetros se establece las necesidades requeridas para diseñar un motocultor con la herramienta adecuada. A través de una investigación bibliográfica comparativa entre herramientas como: apero rotativo, surco y arado de disco, para luego seleccionar la alternativa más viable que dará como resultado un trabajo completo y eficiente a los problemas de laboreo al agricultor. Se ejecutaron los respectivos cálculos para la selección de cada elemento, por medio del análisis de estático y dinámico, con el software Autodesk Inventor se construyó un prototipo que a través de pruebas de campo se obtiene como resultado, la disminución del trabajo manual, contribuye así como beneficio, una optimización del tiempo y de dinero. |
Palabras clave : | INGENIERÍA MECÁNICA DISEÑO DE MÁQUINAS MAQUINARIA AGRÍCOLA MOTOCULTOR LABRANZA |
Fecha de publicación : | sep-2022 |
URI : | http://dspace.ups.edu.ec/handle/123456789/23294 |
Idioma: | spa |
Pertenece a las colecciones: | Grado |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
UPS - TTS937.pdf | Texto completo | 5,57 MB | Adobe PDF | Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons