Diseño del sistema de agua potable y alcantarillado sanitario, para el barrio El Rosario, parroquia de Sangolquí, cantón Rumiñahui, provincia de Pichincha

Para citar o enlazar este item, por favor use el siguiente identificador: http://dspace.ups.edu.ec/handle/123456789/23004
Title: Diseño del sistema de agua potable y alcantarillado sanitario, para el barrio El Rosario, parroquia de Sangolquí, cantón Rumiñahui, provincia de Pichincha
Authors: Lliguin Naranjo, Johanna Gabriela
Tinoco Cuenca, Josselyn Estefanía
Advisor: Yépez Martínez, Verónica Valeria
Abstract: The project to develop is about the design of the drinking water network, and sanitary sewage throughout El Rosario neighborhood. which is located in the parish of Sangolqui, canton Rumiñahi, whose topography is 30, 3 hectares with a future population of 14070 inhabitants, to whom we want to give a better lifestyle giving them these basic systems to guarantee everyone a good life. The drinking water system is designed with PVC pipe with a diameter of 2 to 6 inches, in accordance with EMAAPS standards. This system is located to the right of the axis of the road, with a maximum depth of one meter, with a design flow that covers the entire population of 15 liters per second with speeds between 0.6 to 4m/s with pressures of 10 at 60 mca. The sanitary sewer network is designed for a flow rate of 158 l/s, with a PVC pipe with a diameter of 250mm and 300mm, 65 wells type b1 (typical) with speeds between 0.5 m/s and 4.5 m/s. The length of the pipe for the sanitary sewage system is 4,868 m and for the drinking water network, 4,787 m. In addition, you can obtain an approximate reference value of $1,972,68.19. As this is a regulated project, it complies with the requirements of the environmental management law, where positive impacts are established without causing any damage to the ecosystem and the environment.
Translated abstract: El proyecto por desarrollarse se trata del diseño de la red de agua potable y alcantarillado sanitario en el barrio El Rosario, parroquia de Sangolquí, cantón Rumiñahui, el cual nos muestra su topografía un área de 30,3 hectáreas con una población futura de 14070 habitantes, a quienes queremos brindar un mejor estilo de vida proveyéndoles estos sistemas básicos para garantizar un buen vivir. El sistema de agua potable es diseñado con tubería PVC con diámetros de 2 a 6 pulgadas de acuerdo con la norma de la EMAAPS, está ubicado a la derecha del eje de la vía, a una profundidad máxima de 1 metro, con un caudal de diseño que abarca toda la población de 15 litros sobre segundos con velocidades entre 0,6 a 4 m/s, con presiones de 10 a 60 m.c.a. La red de alcantarillado sanitario se diseña para un caudal de 158 l/s, con tubería PVC de diámetro 250mm y 300mm, 65 pozos tipo B1 (típicos), con velocidades entre 0,5 m/s y 4,5 m/s. La longitud de tubería para alcantarillado sanitario es de 4868 m y para la red de agua potable 4787m además se obtiene un valor referencial aproximado de $1.972.658,19. Al ser un proyecto normado cumple con lo estipulado en la Ley de Gestión Ambiental donde se recalcan los impactos ambientales positivos sin causar ningún daño al ecosistema y medio ambiente.
Keywords: INGENIERÍA CIVIL
INGENIERÍA SANITARIA
INGENIERÍA DEL ABASTECIMIENTO DE AGUA
ALCANTARILLADO - TRAZADO
Issue Date: Aug-2022
URI: http://dspace.ups.edu.ec/handle/123456789/23004
Language: spa
Appears in Collections:Grado

Files in This Item:
File Description SizeFormat 
UPS - TTS855.pdfTexto completo15,65 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons