Diseño hidráulico de la captación y aducción del sistema de agua umbría para consumo humano en la parroquia de Aloasí – cantón Mejía
Para citar o enlazar este item, por favor use el siguiente identificador:
http://dspace.ups.edu.ec/handle/123456789/22368
Title: | Diseño hidráulico de la captación y aducción del sistema de agua umbría para consumo humano en la parroquia de Aloasí – cantón Mejía |
Authors: | Yánez Guerra, Luis Daniel |
Advisor: | Arias Altamirano, Edwin Rodrigo |
Abstract: | The project collects basic criteria on the hydraulic design of the components such as intake, conduction and sand removal, for subsequent storage and distribution from the treatment plant, since they are essential for the good performance of the water system, for which consider enabling the collection of water through a new catchment, and being able to have sufficient availability of the water resource for human consumption. Different studies were carried out to obtain the ground levels through the implementation of GPS control points and thus complemented with a topographical survey of the sector, with which it was finally possible to start the work required for the hydraulic designs of intake, conduction and sand trap required to be able to solve the problems arising from the non-functioning of the existing catchment. To obtain the flow required in the design, the respective basin was built from the study point, and thus, with the Rational and SCS methods, calculate the value that will be used. Through the evaluation of environmental impacts, it will help us to solve the possible damages that could occur due to the execution of the project. Through the calculation of the reference budget and valued work schedule, the total cost and the approximate construction time of the project can be determined. |
Translated abstract: | El proyecto recopila criterios básicos sobre el diseño hidráulico de los componentes como son la captación, conducción y desarenación, para su posterior almacenamiento y distribución desde la Planta de tratamiento, ya que son fundamentales para el buen desempeño del sistema de agua, por lo que se plantea habilitar la recolección del agua mediante una nueva captación, y poder tener la suficiente disponibilidad del recurso hídrico para el consumo humano. Se realizó diferentes estudios para la obtención de los niveles del terreno mediante la implantación de puntos de control GPS y así complementar con un levantamiento topográfico del sector, con el que finalmente se pudo iniciar los trabajos requeridos para los diseños hidráulicos de captación, conducción y desarenador requeridos para poder resolver los problemas surgidos por el no funcionamiento de la captación actual existente. Para la obtención del caudal requerido en el diseño, se construyó la respectiva cuenca desde el punto de estudio, y así con los métodos Racional y SCS calcular el valor que va a ser utilizado. Por medio de la evaluación de impactos ambientales, nos ayudará a dar solución a las posibles afectaciones que se podrían dar por la ejecución del proyecto. Mediante el cálculo del presupuesto referencial y cronograma valorado de trabajos, se puede determinar el costo total y tiempo aproximado de construcción del proyecto. |
Keywords: | INGENIERÍA CIVIL DISEÑO EN INGENIERÍA ESTRUCTURAS HIDRÁULICAS INGENIERÍA DEL ABASTECIMIENTO DE AGUA AGUA POTABLE |
Issue Date: | Mar-2022 |
URI: | http://dspace.ups.edu.ec/handle/123456789/22368 |
Language: | spa |
Appears in Collections: | Grado |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
UPS - TTS762.pdf | Texto completo | 5,39 MB | Adobe PDF | View/Open |
This item is licensed under a Creative Commons License