Determinación del punto óptimo de potencia de paneles fotovoltaicos en base a variables difusas mediante el modelo de Liu Jordan

Para citar o enlazar este item, por favor use el siguiente identificador: http://dspace.ups.edu.ec/handle/123456789/19344
Título : Determinación del punto óptimo de potencia de paneles fotovoltaicos en base a variables difusas mediante el modelo de Liu Jordan
Autor : Fiallos Chamorro, David Dario
Director de Tesis: Tipán Vergara, Luis Fernando
Resumen traducido: This document focuses on solar generation, specifically on the optimum point of power delivered by the photovoltaic panel. To reach the end of the study, it is necessary to develop a mathematical model which must be followed sequentially based initially on the solar model of Liu & Jordan, which allows a study of the amount of incident irradiance on an inclined surface. Followed by dirt as a diffuse variable, how it affects the panel. In addition, climatic variables such as temperature and humidity are considered, variables necessary to obtain the optimum power point. The proposed mathematical model aims to determine the inclination and orientation of the highest solar radiation capture on an inclined surface. Additionally, how to minimize losses due to dirt and climatic variables as they affect their impact on the efficiency of the panel. Finally, based on the aforementioned parameters, results are shown under three considerations: for the data obtained by the UPS meters, inclination and orientation obtained with a compass and inclinometer, the result calculated under the current conditions of the site and finally the calculation under conditions. optimum, this determines the optimum power point.
Resumen : En el presente documento se centra en generación solar, específicamente en el punto óptimo de potencia entregada por el panel fotovoltaico. Para llegar al fin de estudio, es necesario desarrollar un modelo matemático el cual debe seguirse de manera secuencial basado inicialmente en el modelo solar de Liu & Jordan, el cual permite un estudio de la cantidad de irradiancia incidente sobre una superficie inclinada. Seguido por la suciedad como variable difusa, como afecta al panel. Además, se consideran variables climáticas como temperatura y humedad, variables necesarias para la obtención del punto óptimo de potencia. El modelo matemático propuesto tiene como objetivo determinar la inclinación y orientación de mayor captación de radiación solar en una superficie inclinada. Adicionalmente, como minimizar las pérdidas por suciedad y las variables climáticas como afectan su impacto en la eficiencia del panel. Finalmente, en base a los parámetros ya mencionados se muestran resultados bajo tres consideraciones: para los datos obtenidos por los medidores de la UPS inclinación y orientación obtenidos con brújula e inclinómetro, resultado calculado bajo las condiciones actuales del emplazamiento y por último el cálculo bajo condiciones óptimas, con esto se determina el punto óptimo de potencia.
Palabras clave : INGENIERÍA ELÉCTRICA
ANÁLISIS DE REDES ELÉCTRICAS
OPTIMIZACIÓN MATEMÁTICA
ELECTRÓNICA DE POTENCIA
PANEL FOTOVOLTAICO
ESTADÍSTICA
Fecha de publicación : oct-2020
URI : https://dspace.ups.edu.ec/handle/123456789/19344
Idioma: spa
Pertenece a las colecciones: Grado

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UPS - TTS187.pdfTexto completo936,2 kBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons