Diseño y cálculo estructural del coliseo multiuso en el barrio San Alfonso, de la parroquia de Pintag
Para citar o enlazar este item, por favor use el siguiente identificador:
http://dspace.ups.edu.ec/handle/123456789/18598
Título : | Diseño y cálculo estructural del coliseo multiuso en el barrio San Alfonso, de la parroquia de Pintag |
Autor : | Guaján Cotacachi, Dario Fabián Rueda Carlosama, Willan Octavio |
Director de Tesis: | López Machado, Nelson Andrés |
Resumen traducido: | This titling work is aimed at the structural design of a multi-purpose coliseum for San Alfonso neighborhood, located in the Pintag parish, Quito canton, Pichincha province. For the design of the structure, the “Ecuadorian Construction Standard” (NEC 2015) was taken as a reference, which details the criteria that each of the designs must meet. For concrete structural members such as columns, girder, foundations; the design and calculations were complemented by the regulations of the "American Concrete Institute" (ACI 318-14), on the other hand, for the design and calculation of structural steel members, by the regulations of the "American Iron and Steel Institute " (AISI-96). For the modeling of the structure, a computational tool was used (SAP 2000) and the verification of the results was supported by electronic sheets (Excel). Finally, the structural plans of the multi-purpose coliseum have been made. |
Resumen : | Este trabajo de titulación está dirigido al diseño estructural de un coliseo multiuso para el barrio de San Alfonso, ubicado en la parroquia Pintag, cantón Quito, provincia de Pichincha. Para el diseño de la estructura, se tomó como referencia la “Norma Ecuatoriana de la Construcción” (NEC 2015), que detalla los criterios que cada uno de los diseños debe cumplir. Para elementos estructurales de hormigón, como columnas, vigas, cimentación; el diseño y los cálculos se complementaron con la normativa "American Concrete Institute" (ACI 318-14), por otro lado, para el diseño y cálculo de miembros de acero estructural, con las normativas "American Iron and Steel Institute" (AISI -96). Para el modelado de la estructura, se utilizó una herramienta computacional (SAP 2000) y la verificación de los resultados fue respaldada por hojas electrónicas (Excel). Finalmente, se han realizado los planos estructurales del coliseo multiuso. |
Palabras clave : | INGENIERÍA CIVIL DISEÑO ESTRUCTURAL ANFITEATROS (ARQUITECTURA) |
Fecha de publicación : | mar-2020 |
URI : | https://dspace.ups.edu.ec/handle/123456789/18598 |
Idioma: | spa |
Pertenece a las colecciones: | Grado |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
UPS - ST004513.pdf | Texto completo | 6,03 MB | Adobe PDF | Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons