Diseño e implementación de un módulo de pruebas para la capacitación del departamento de ingeniería de la empresa siselec S.A. Utilizando el protocolo de comunicación iec 61850 para la simulación de un sistema scada de una subestación eléctrica básica.

Abstract

The objective of this project was to provide the engineering department of the SISELEC.SA Company with a test module, which allows the development of simulations at the control level for an electrical substation, using a SCADA system through the application of the IEC 61850 standard of communication protocol in the IEDs of protection. The test module was implemented to perform a specific simulation on certain measuring equipment and protection of an electrical substation, using the test equipment which is a universal relay OMICRON model CMC-356 for signal generation Analogues, a three-phase automatic protection Relay for the SEL-487E brand transformer and primary protective equipment simulators such as power breakers, whose control signals and the states of the same can be monitored in the SCADA system. The Laboratory was located in the company SISELEC S.A and was designed in two modules: one of control and another of communication, that for this case the module of detailed communication will be implemented in this technical project, in which the signal the integration is realized From the control to the SCADA through the communication protocol IEC 61850, in the software ACSELERATOR RTAC. This provides for the continuous training of engineers and technical personnel involved in this subject, in addition to carrying out practices that reflect the start-up of an electrical substation.