Análisis y determinación de propiedades a tracción de productos fabricados de material fundido ABS utilizando una impresora 3D.
Para citar o enlazar este item, por favor use el siguiente identificador:
http://dspace.ups.edu.ec/handle/123456789/15676
Title: | Análisis y determinación de propiedades a tracción de productos fabricados de material fundido ABS utilizando una impresora 3D. |
Authors: | Sosa Díaz, Juan Carlos |
Advisor: | Quitiaquez Sarzosa, René Patricio |
Abstract: | El presente proyecto de investigación está orientado a determinar las propiedades mecánicas de productos fabricados de material fundido ABS, realizando impresión 3D y mediante el desarrollo experimental de un ensayo a tracción; aplicando la norma que corresponde de acuerdo al material de utilización; en este caso la norma ASTM D638 la cual se aplica para el producto que se va a fabricar estableciendo la metodología de desarrollo de la experimentación y el proceso FDM (material fundido por deposición) de realización para la impresión; y, luego realizar un estudio comparativo de esfuerzo, deformación y módulo de elasticidad al realizar una simulación y un análisis utilizando el software de aplicación ANSYS para estos experimentos, donde se obtendrá información sobre pruebas experimentales de ensayos a tracción con su gráfico característico esfuerzo - deformación de productos que se someten a tensión; y, de esta manera establecer valores que permitan verificar el comportamiento presentado por las diferentes variables en la obtención de resultados luego de realizar la experimentación. |
Translated abstract: | The present research project is aimed at determining the mechanical properties of products made of ABS cast material, performing 3D printing and through the experimental development of a tensile test; applying the corresponding norm according to the material of use; in this case the ASTM D638 standard which is applied to the product to be manufactured, establishing the methodology for the development of the experimentation and the FDM process (material cast by deposition) of realization for printing; and then carry out a comparative study of stress, deformation and modulus of elasticity when performing a simulation and analysis using the ANSYS application software for these experiments, where you will obtain information on experimental tests of tensile tests with its characteristic effort - deformation graph of products that are subjected to tension; and, in this way, establish values that allow verifying the behavior presented by the different variables in obtaining results after conducting the experimentation. |
Keywords: | MECÁNICA DE MATERIALES ENSAYO DE MATERIALES IMPRESIÓN EN PLÁSTICO RESISTENCIA DE MATERIALES ESFUERZOS Y DEFORMACIONES ELASTICIDAD |
Issue Date: | Jun-2018 |
URI: | https://dspace.ups.edu.ec/handle/123456789/15676 |
Language: | spa |
Appears in Collections: | Grado |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
UPS-ST003588.pdf | Texto completo | 2,09 MB | Adobe PDF | View/Open |
This item is licensed under a Creative Commons License