Diseño y modelamiento matemático un dron de (20x10x9cm) usando impresión 3d en base de un polímero
Para citar o enlazar este item, por favor use el siguiente identificador:
http://dspace.ups.edu.ec/handle/123456789/21075
Título : | Diseño y modelamiento matemático un dron de (20x10x9cm) usando impresión 3d en base de un polímero |
Autor : | Coronel Silva, Lissette Alejandra |
Director de Tesis: | Heredia Velasteguí, Jaime Rolando |
Resumen traducido: | This Degree Project is based on the design and modeling of a drone (20x10x9 cm) for the use of the research group of the Salesian Polytechnic University in order to develop new applications. Chapter I describes the background, justification, statement of the problem and the general and specific objectives. The current research work is evidenced by means of the mathematical modeling of the engine and the drone. This chapter also describes the conceptual framework, where the criteria and engineering foundations for the manufacture of the prototype are developed. Taking into account that the definitions of 3D printing are described, mathematical modeling for the execution of the project. Chapters II and III, mention the design process, where the parameters for the design of the drone, the mechanical design factors, the validation of the prototype through the analysis of forces in the CAD Inventor software are described. In chapter IV, the mathematical modeling of the high-speed direct current motor is detailed using the Simulink application of the Matlab software and thus validating the feasibility of the Project |
Resumen : | El presente trabajo de titulación se basa en el diseño y modelamiento de un dron (20x10x9 cm) para el uso del grupo de investigación de la Universidad Politécnica Salesiana con el fin de desarrollar nuevas aplicaciones. En el capítulo I se describe los antecedentes, justificación, planteamiento del problema y los objetivos general y específicos. El vigente trabajo de investigación se evidencia por medio del modelamiento matemático del motor y el dron. Este capítulo también describe el marco conceptual, donde se desenvuelve los criterios y fundamentos de ingeniería para la fabricación del prototipo. Tomando en cuenta que se describe las definiciones de la impresión 3D, modelamiento matemático para la ejecución del proyecto. El capítulo II y III, menciona el proceso de diseño, donde se describe los parámetros para el diseño del dron, los factores de diseño mecánico, la validación del prototipo mediante el análisis de fuerzas en el software CAD Inventor. En el capítulo IV se detalla el modelamiento matemático del motor de corriente continua de alta velocidad usando la aplicación Simulink del software Matlab y así validar la factibilidad del proyecto. |
Palabras clave : | INGENIERÍA MECÁNICA DISEÑO EN INGENIERÍA ANÁLISIS MATEMÁTICO VEHÍCULOS AÉREOS NO TRIPULADOS RESISTENCIA DE MATERIALES ÁCIDOS ORGÁNICOS IMPRESIÓN EN PLÁSTICO |
Fecha de publicación : | sep-2021 |
URI : | http://dspace.ups.edu.ec/handle/123456789/21075 |
Idioma: | spa |
Pertenece a las colecciones: | Grado |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
UPS - TTS520.pdf | Texto completo | 1,67 MB | Adobe PDF | Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons