Diseño de una estructura de disipación de energía para el proyecto zona 15 la Internacional, ubicado en las avenidas Ajaví y Teniente Hugo Ortiz en el sector de Solanda, cantón Quito

Para citar o enlazar este item, por favor use el siguiente identificador: http://dspace.ups.edu.ec/handle/123456789/25531
Título : Diseño de una estructura de disipación de energía para el proyecto zona 15 la Internacional, ubicado en las avenidas Ajaví y Teniente Hugo Ortiz en el sector de Solanda, cantón Quito
Autor : Granja Salazar, Anthony Alejandro
Saquinga Loachamín, Christopher David
Director de Tesis: Yépez Martínez, Verónica Valeria
Resumen traducido: The purpose of the project is to design an energy dissipation structure for the sinkhole located in the “La Internacional” neighborhood in the south of Quito. Analysis of the report submitted by EPMMOP was carried out to obtain the necessary data for the selection and construction of this structure. The solution to this problem was the redesign of the Machángara river channel, as well as the implementation of a type III dissipating basin in which all the adequate construction parameters for the hydraulic design of these structures were met. Both structures were modeled using the Flow 3D program to verify their functionality in the event of a flood event as well as with the average daily flow. The construction of these structures will nullify the effect of the sinkhole, providing a definitive solution to the overflow of the slopes, thus providing greater safety for the main roads, businesses, and homes in the surrounding area.
Resumen : El proyecto tiene como finalidad el diseño de una estructura de disipación de energía para el socavón ubicado en el barrio “La Internacional” al sur de Quito. Donde se realizaron análisis del informe entregado por la EPMMOP con el fin de obtener los datos necesarios para la elección y construcción de esta estructura. La solución a este problema fue realizar el rediseño del canal de encauce del río Machángara, así como la implementación de un cuenco disipador tipo III en el que se cumplió con todos los parámetros constructivos adecuados para el diseño hidráulico de estas. Ambas estructuras fueron modeladas a través del programa Flow 3D para verificar la funcionalidad ante un evento de crecida como con el caudal medio diario. La construcción de estas estructuras anulará el efecto del socavón dando una solución definitiva al desbordamiento de los taludes, brindando así mayor seguridad hacia las vías principales, negocios y viviendas que se encuentran a su alrededor.
Palabras clave : INGENIERÍA CIVIL
DISEÑO EN INGENIERÍA
DISEÑO ESTRUCTURAL
DISIPACIÓN DE ENERGÍA
CANAL DE ENCAUCE
DISEÑO HIDRÁULICO
Fecha de publicación : ago-2023
URI : http://dspace.ups.edu.ec/handle/123456789/25531
Idioma: spa
Pertenece a las colecciones: Grado

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
TTS1389.pdfTexto completo7,24 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons