Desarrollo de una solución de hardware y software para el control automático de puertas de garage

Para citar o enlazar este item, por favor use el siguiente identificador: http://dspace.ups.edu.ec/handle/123456789/19800
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorJaya Duche, Manuel Rafael-
dc.contributor.authorPosso Jácome, Carlos David-
dc.contributor.authorRamírez Merino, Brayan Leonardo-
dc.date.accessioned2021-02-23T05:00:02Z-
dc.date.available2021-02-23T05:00:02Z-
dc.date.issued2021-02-
dc.identifier.urihttp://dspace.ups.edu.ec/handle/123456789/19800-
dc.descriptionEl presente proyecto tiene como objetivo diseñar una aplicación multiplataforma que controle una puerta de garaje, a través de la construcción de un circuito que permita una conexión Wifi utilizando smartphones. Para dar solución al proyecto mediante la metodología Proceso Unificado Ágil, se utilizaron en el circuito un NodeMCU y un relé optoacoplador para conectar el motor de la puerta de garaje a la red wifi a la que pertenezca. El NodeMCU fue programado con varios scripts los cuales permiten la interacción mediante señales eléctricas entre el motor del garaje y la aplicación móvil. La solución de software fue diseñada en una interfaz amigable para el usuario mediante programación en bloques a través de la plataforma AppInventor y Thunkable, de esta forma se puede acceder a la aplicación en cualquier smartphone con sistema operativo Android o iOS. Los resultados están generados en base a varias pruebas elaboradas al sistema, se realizó una encuesta de satisfacción para mejorar la aplicación con respecto a la opinión del usuario obteniendo un 90% de satisfacción en el manejo del prototipo. Se probó la aplicación en las diferentes versiones de sistemas operativos de iOS y Android, las versiones más recientes no presentan problemas, pero las versiones más antiguas impiden su instalación o su funcionamiento es defectuoso. Durante un mes se realizaron pruebas de funcionalidad y efectividad con resultados del 96.77% de funcionalidad y 98% de efectividad. Una vez implementada la solución permite un ahorro económico del 53.125% en comparación a precios en el mercado actual del país, además gracias a la aplicación móvil amigable al usuario y multiplataforma, permite que cualquier usuario con un smartphone sea capaz de interactuar con el sistema.spa
dc.description.abstractThe objective of this project is to design a multiplatform application that controls a garage door, through the construction of a circuit that allows a WiFi connection using smartphones. To give a solve the project through the Agile Unified Process methodology, a Node MCU and an optocoupler relay were used in the circuit to connect the garage door motor to the Wi-Fi network to which it belongs. The Node MCU was programmed with various scripts which allow interaction through electrical signals between the garage motor and the mobile application. The software solution was designed in a user-friendly interface through block programming through the AppInventor and Thunkable platform, in this way the application can be accessed on any smartphone with an Android or iOS operating system. The results are generated based on several tests made to the system, a satisfaction survey was carried out to improve the application with respect to the user's opinion, obtaining a 90% satisfaction in handling the prototype. The application was tested on the different versions of iOS and Android operating systems, the most recent versions do not present problems, but the older versions prevent its installation or its operation is defective. During a month, tests of functionality and effectiveness were carried out with results of 96.77% functionality and 98% effectiveness. Once the solution is implemented, it allows an economic saving of 53.125% compared to prices in the current market in the country, in addition, thanks to the user-friendly and multiplatform mobile application, it allows any user with a smartphone to be able to interact with the system.spa
dc.language.isospaspa
dc.rightsopenAccessspa
dc.rightsAtribución-NoComercial-SinDerivadas 3.0 Ecuador*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/ec/*
dc.subjectINGENIERÍA DE SISTEMASspa
dc.subjectANÁLISIS DE SISTEMASspa
dc.subjectHARDWAREspa
dc.subjectSOFTWAREspa
dc.subjectCONTROL AUTOMÁTICOspa
dc.subjectPUERTASspa
dc.titleDesarrollo de una solución de hardware y software para el control automático de puertas de garagespa
dc.typebachelorThesisspa
ups.carreraIngeniería de Sistemasspa
ups.sedeSede Quitospa
Pertenece a las colecciones: Grado

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UPS - TTS249.pdfTexto completo2,13 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons