Mejoramiento vial en 2,50 km de longitud de la calle “San Alfonso” en la parroquia Alóag, cantón Mejía, provincia Pichincha

Para citar o enlazar este item, por favor use el siguiente identificador: http://dspace.ups.edu.ec/handle/123456789/27216
Título : Mejoramiento vial en 2,50 km de longitud de la calle “San Alfonso” en la parroquia Alóag, cantón Mejía, provincia Pichincha
Autor : Carrera Villamagua, Tito Javier
Yuquilema Paucar, Inti Atahualpa
Director de Tesis: Altamirano León, Byron Iván
Resumen traducido: This technical project was developed to establish a road improvement of "San Alfonso" street, located in the Province of Pichincha, Canton Mejia, Parish of Alóag, with a length of 2.5 km, where the road helps the economic, agricultural and livestock development, it is also considered as an alternative road with the connection to the city of Machachi. For the study of the project it was necessary to carry out several studies in the field and laboratory. At the beginning, the respective topographic study was carried out, in addition to the vehicle count for 7 days, during 12 hours where the vehicular traffic was determined, also the soil study was carried out, where soil pits were extracted every 600 meters with a depth of 1.50 m, establishing the tests as: AASHTO classification, SUCS and Modified CBR. Next, the geometric design of the road was developed through the topography of the project, following the recommendations of the MOP 2003 and AASHTO 93 standards, which will help us design the pavement structure, as well as the hydraulic study with the design of the ditches and sewage to avoid flooding on the road, the respective analysis of the road signs was also carried out, where the locations of the vertical and horizontal signs were established. In addition, the environmental evolution was dealt with, where the environmental impact that the project to be executed will produce was determined and finally the respective budget, valued chronogram and VAN and TIR calculation were made to establish whether the project is feasible or not accepted.
Resumen : El presente proyecto técnico se desarrolló para establecer un mejoramiento vial de la calle “San Alfonso”, localizado en la Provincia de Pichincha, Cantón Mejía, Parroquia de Alóag, con una longitud de 2,5 Km, donde la vía ayuda al desarrollo económico, agrícola y ganadero, también se considera como una vía alterna con la conexión de la ciudad de Machachi. Para el estudio del proyecto se necesitó realizar varios estudios como en campo y laboratorio. Al comienzo se realizó el respectivo estudio topográfico, además se realizó el conteo vehicular por 7 días, durante 12 horas donde se determinó el tráfico vehicular, asimismo se realizó el estudio de suelo, donde se extrajo las calicatas de suelo cada 600 metro con una profundidad de 1.50 m, estableciendo los ensayos como: clasificación AASHTO, SUCS y CBR Modificado. A continuación se desarrolló el diseño geométrico de la vía mediante la topografía de proyecto, siguiendo las recomendaciones de las norma MOP 2003 y AASHTO 93, el cual nos ayudara a diseñar la estructura del pavimento, de igual manera se procedió al estudio hidráulico con el diseño de las cunetas y del alcantarillado para evitar inundaciones en la vía, también se ejecutó el respetivo análisis de la señalización vial donde se estableció las ubicaciones de las señalizaciones verticales y horizontales. Además, se trató de la evolución ambientas donde se determinó el impacto ambiental que producirá el proyecto a ejecutarse y por último se realizó el respectivo presupuesto, cronograma valorado y el cálculo del VAN y TIR para establecer si el proyecto es factible o no aceptado.
Palabras clave : INGENIERÍA CIVIL
INGENIERÍA DE CARRETERAS
CARRETERAS - DISEÑO Y CONSTRUCCIÓN
DESARROLLO RURAL
Fecha de publicación : feb-2024
URI : http://dspace.ups.edu.ec/handle/123456789/27216
Idioma: spa
Pertenece a las colecciones: Grado

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
TTS1749.pdfTexto completo4,72 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons