Propuesta para el diseño de la red del sistema de agua potable de la Junta Administradora Uyumbicho, sección norte, del cantón Mejía, provincia de Pichincha

Para citar o enlazar este item, por favor use el siguiente identificador: http://dspace.ups.edu.ec/handle/123456789/27082
Título : Propuesta para el diseño de la red del sistema de agua potable de la Junta Administradora Uyumbicho, sección norte, del cantón Mejía, provincia de Pichincha
Autor : Ramos Viracocha, Flavio Iván
Vargas Quishpe, Franklin Alexis
Director de Tesis: Yépez Martínez, Verónica Valeria
Resumen traducido: The project to be carried out consists of the design of the drinking water distribution network for the neighborhoods Angamarca, Angamarca Alto, La Isla, El Guayo, El Calvario, San Blas, Central, Palo Cruzado, San Sebastián, of the parish of Uyumbicho, of the Mejía canton, which in its topography consists of an area of 90.5 hectares with a future population of 3,350 inhabitants, to whom we want to provide a better drinking water service that meets quality and quantity standards. The drinking water system network is designed with PVC pipes with diameters that vary between 50 mm to 110 mm according to what is specified in the EMAAP-Q regulations, the depth complies with the maximum regulations of 1.50 meters. Their speeds range from 0.30 meters per second to 2 meters per second, their pressures are within the requirement parameters that range from 10 meters of water column to a maximum of 50 meters of water column. The storage tank is raised from its original height 7 meters up the mountain, to guarantee pressures in the most critical nodes.
Resumen : El proyecto por realizarse consta del diseño de la red de distribución de agua potable para los barrios Angamarca, Angamarca Alto, La Isla, El Guayo, El Calvario, San Blas, Central, Palo Cruzado, San Sebastián, de la parroquia de Uyumbicho, del cantón Mejía, el cual en su topografía consta de un área de 90.5 hectáreas con una población futura de 3350 habitantes, a los que se quiere dar un mejor servicio de agua potable que cumplan con estándares de calidad y cantidad. La red del sistema de agua potable está diseñada con tuberías PVC con diámetros que varían entre los 50 mm a 110 mm de acuerdo a lo especificado en la normativa de la EMAAP-Q, la profundidad cumple con la normativa de máximo 1. 50 metros, sus velocidades van desde los 0.30 metros sobre segundo hasta los 2 metros sobre segundo, sus presiones están dentro de los parámetros de requerimiento que van desde los 10 metros de columna de agua hasta un máximo de 50 metros de columna de agua. El tanque de almacenamiento se eleva de su cota original 7 metros montaña arriba, para garantizar las presiones en los nodos más críticos.
Palabras clave : INGENIERÍA CIVIL
INGENIERÍA DEL ABASTECIMIENTO DE AGUA
AGUA - DISTRIBUCIÓN
AGUA POTABLE
DESARROLLO RURAL
Fecha de publicación : feb-2024
URI : http://dspace.ups.edu.ec/handle/123456789/27082
Idioma: spa
Pertenece a las colecciones: Grado

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
TTS1656.pdfTexto completo4,61 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons