Diseño e implementación de un control difuso para realizar un estudio comparativo de algoritmos de control en un túnel de viento
Para citar o enlazar este item, por favor use el siguiente identificador:
http://dspace.ups.edu.ec/handle/123456789/22599
Título : | Diseño e implementación de un control difuso para realizar un estudio comparativo de algoritmos de control en un túnel de viento |
Autor : | Chiriboga hidalgo, Francisco Javier Tandazo Jordán, John Sebastián |
Director de Tesis: | Lima Cedillo, Byron Xavier |
Resumen traducido: | This document shows the comparison of a Fuzzy and PID controller of a wind tunnel plant, with a PLC S7-1500 as master connected by PROFIBUS network to an ET200S slave device. The objective is to make the comparison of which of the two controllers is more stable, comparing which of them reaches the reference value in a shorter time, and likewise with the signals and error derivative, and the output or DUTY of both. controllers With the project it is possible to demonstrate which controller is more robust. It should be noted that the times it takes them to reach the desired value between both have been compared. The design of each controller was made in different applications, being the design of the PID controller made with PID COMPACT and the design of the fuzzy control in SIMULINK of MATLAB. |
Resumen : | El presente documento muestra la comparativa de un controlador Difuso y PID de una planta de túnel de viento, con un PLC S7-1500 como maestro conectado por red PROFIBUS a un dispositivo esclavo ET200S. Se plantea como objetivo realizar la comparativa de cuál de los dos controladores es más estable, se compara cuál de ellos llega al valor de referencia en un tiempo menor, y así mismo con las señales y derivada de error, y la salida o DUTY de ambos controladores. Con el proyecto se consigue demostrar cual controlador es más robusto. Cabe recalcar que se ha comparado los tiempos en que les toma llegar al valor deseado entre ambos. El diseño de cada controlador fue hecho en diferentes aplicaciones siendo el diseño del controlador PID hecho con PID COMPACT y el diseño del controlado difuso en SIMULINK de Matlab. |
Palabras clave : | FUZZY CONTROLLER PID OPC PLC MATLAB |
Fecha de publicación : | 2022 |
URI : | http://dspace.ups.edu.ec/handle/123456789/22599 |
Idioma: | spa |
Pertenece a las colecciones: | Grado |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
UPS-GT003734.pdf | Texto completo | 1,38 MB | Adobe PDF | Visualizar/Abrir |
Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons