Diseño de una red PON para la empresa Vallevisión en las zonas de Tambillo y Amaguaña

Para citar o enlazar este item, por favor use el siguiente identificador: http://dspace.ups.edu.ec/handle/123456789/18420
Título : Diseño de una red PON para la empresa Vallevisión en las zonas de Tambillo y Amaguaña
Autor : Pillajo Tipantuña, William Bernabe
Taipe Álvarez, Jonathan Vinicio
Director de Tesis: Arévalo Bermeo, Germán Vicente
Resumen traducido: This degree work is about the design of a PON network to offer cable TV and Internet services. Due to the rise of new technology and the needs of users to have more bandwidth, it is necessary to update the network currently available by Vallevisión. A comparison was made between EPON and GPON technology to perform the design, which is why GPON technology is chosen. The design was carried out in the QGIS software, through the software the elements to be used throughout the design are georeferenced and the OpenStreetMap map is worked on, in which the information of the existing homes in Tambillo and Amaguaña was collected. Once each of the elements is georeferenced, the farthest user is obtained to perform the respective simulation and guarantee the design of the network. The simulation is carried out using the OptSim software where the BER vs Prx graph and the eye diagram were obtained, using the graphs the optimal performance of the designed network is verified. An economic analysis is carried out to observe the feasibility of the implementation of the network both in the implementation expenses and in the profits generated, so it is established that the implementation of the network designs is suitable.
Resumen : El presente trabajo de titulación trata sobre el diseño de una red PON para ofertar servicios de Televisión por cable e Internet. Debido al auge de la nueva tecnología y de las necesidades de los usuarios de disponer mayor ancho de banda, es necesario actualizar la red que dispone actualmente Vallevisión. Se hizo una comparación entre la tecnología EPON y GPON para realizar el diseño, por lo cual se elige la tecnología GPON. El diseño se realizó en el software QGIS, mediante el software se georreferencia los elementos a utilizar en todo el diseño y se trabaja con el mapa de OpenStreetMap, en el cual se levantó la información de los hogares existentes en Tambillo y Amaguaña. Una vez georreferenciado cada uno de los elementos se procede a obtener al usuario más lejano para realizar la simulación respectiva y garantizar el diseño de la red. La simulación se realiza mediante el software OptSim donde se obtuvo la gráfica del BER vs Prx y el diagrama de ojo, mediante las gráficas se verifica el rendimiento óptimo de la red diseñada. Se realiza un análisis económico para observar la factibilidad de la implementación de la red tanto en los gastos de implementación y en las ganancias generadas, por lo cual se establece que la implementación de la red diseña es apta.
Palabras clave : INGENIERÍA ELECTRÓNICA
REDES DE COMPUTADORES (PLANIFICACIÓN)
SISTEMAS DE TELECOMUNICACIÓN
TELECOMUNICACIONES
TELEVISIÓN POR CABLE
Fecha de publicación : feb-2020
URI : https://dspace.ups.edu.ec/handle/123456789/18420
Idioma: spa
Pertenece a las colecciones: Grado

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UPS - ST004445.pdfTexto completo3,05 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons