Diseño de la red de campus para la Cooperativa del Ministerio de Educación CACSPMEC

Para citar o enlazar este item, por favor use el siguiente identificador: http://dspace.ups.edu.ec/handle/123456789/18360
Título : Diseño de la red de campus para la Cooperativa del Ministerio de Educación CACSPMEC
Autor : González Yambay, Martín Alejandro
Mantilla Huasco, Daniel Fernando
Director de Tesis: Domínguez Ayala, Juan Carlos
Resumen traducido: This degree project was carried out for the Cooperativa "CACSPMEC", and aims to design the campus network, to optimize communication processes and ensure better performance thanks to the Quality of Service and Security within it. During the last years, the Cooperativa “CACSPMEC” has had an important institutional growth, which has motivated the decision to design a new network model that is capable of adapting to changes in its physical and logical infrastructure, and future migration to IPV6. To start this project, the baseline survey was carried out in the parent building, and from its analysis a new design was carried out that complies with the parameters of QoS, scalability, availability and security. The PPDIOO methodology was used, and the CISCO hierarchical design for the new design of the campus network, for a better understanding of the different modules covered by that network. Finally, it should be noted that the new topology was designed and tested using networking simulators in which the improvements made for a possible implementation can be verified and documented.
Resumen : El presente proyecto de titulación fue realizado para la Cooperativa “CACSPMEC”, y tiene como objetivo diseñar la red de campus, optimizando los procesos de comunicación y asegurar un mejor desempeño gracias a la Seguridad y a la calidad dentro de la misma. Durante los últimos años, la Cooperativa “CACSPMEC”, ha tenido un importante crecimiento institucional, lo cual ha motivado la decisión de diseñar un nuevo modelo de red que sea capaz de adaptarse a los cambios en su infraestructura física y lógica, y la futura migración a IPV6. Para iniciar el presente proyecto, se realizó el levantamiento de la línea base en el edificio matriz, y a partir de su análisis se procedió a realizar un nuevo diseño que cumpla con los parámetros de QoS, escalabilidad, disponibilidad y seguridad. Se utilizó la metodología PPDIOO, y el diseño jerárquico de CISCO para el nuevo diseño de la red de campus, para un mejor entendimiento de los diferentes módulos que abarca dicha red. Por último, cabe indicar que la nueva topología fue diseñada y probada usando simuladores de networking en los que se puede verificar y documentar, las mejoras realizadas para una posible implementación.
Palabras clave : INGENIERÍA ELECTRÓNICA
REDES DE COMPUTADORES (PLANIFICACIÓN)
INTERNET
TELECOMUNICACIONES
Fecha de publicación : feb-2020
URI : https://dspace.ups.edu.ec/handle/123456789/18360
Idioma: spa
Pertenece a las colecciones: Grado

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UPS - ST004418.pdfTexto completo4,57 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons