Reingeniería del sistema de control de la planta de tratamiento de aguas residuales en la cartopel S.A.I.

Para citar o enlazar este item, por favor use el siguiente identificador: http://dspace.ups.edu.ec/handle/123456789/10411
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorPeñaranda Idrovo, Vicente-
dc.contributor.authorCárdenas Ibáñez, Michelle de los Ángeles-
dc.contributor.authorLara Villón, Marlon Jefferson-
dc.date.accessioned2015-09-25T16:31:03Z-
dc.date.available2015-09-25T16:31:03Z-
dc.date.issued2015-04-
dc.identifier.urihttps://dspace.ups.edu.ec/handle/123456789/10411-
dc.descriptionEl proyecto de reingeniería del sistema de control de la planta de tratamiento de aguas residuales en CARTOPEL S.A.I. se desarrolló con la finalidad de realizar la operación automática de la planta por medio del controlador Allen Bradley MicroLogix 1400. El proceso cuenta con sensores de pH, turbidez y oxígeno disuelto los cuales son conectados al transmisor Liquiline CM444 para enviar las señales analógicas al PLC y de esta manera se pueda realizar el control que garantice un adecuado tratamiento químico y biológico del agua con el objetivo de cumplir con las propiedades físico-químicas del agua tratada, es decir que el agua que es enviada al canal de aguas lluvias se encuentre dentro de las normas y reglamentos vigentes. Así mismo con el propósito de mejorar la homogenización de los químicos se controla la velocidad del motor agitador situado en el tanque en el que se realiza el tratamiento químico por medio de un variador de frecuencia. El trabajo de investigación cuenta también con una pantalla HMI la cual sirve para monitorear las variables del sistema, además la pantalla ofrece la interacción directa con cada motor del proceso y se puede observar las alarmas de falla del sistema y llevar un registro por cada batch (procesamiento por lotes) realizadoen_US
dc.description.abstractThe project of reengineering the control system of the waste water treatment plant at CARTOPEL S.A.I., is developed with the finality of making an automatic working of the plant by using the controller Allen Bradley MicroLogix1400. This work includes pH sensors, turbidity and dissolved oxygen, which are connected to the transmitter Liquiline CM444 to send the analog signals to the PLC and thus it can perform control to certify an adequate chemicals and biologic treatments of the water that is sent into the rain water channels in order to meet the physical and chemical properties of treated water, is to say the water which is sent into the rain water channels is within the norms and reglaments in course. Also for the purpose of improving the chemicals homogeneity of the engine speed agitator located in the tank in which the chemical treatment is performed through a frequency variator. This research also presents an HMI screen which serves to monitor the system variables, the display also provides the direct interaction with each processing engine and can observe the system failure alarms and keep a record for each batch performed.en_US
dc.language.isospaen_US
dc.rightsopenAccess-
dc.subjectAGUAS RESIDUALESen_US
dc.subjectAUTOMATIZACIÓNen_US
dc.subjectPLCen_US
dc.subjectTRATAMIENTO QUÍMICO Y BIOLÓGICOen_US
dc.titleReingeniería del sistema de control de la planta de tratamiento de aguas residuales en la cartopel S.A.I.en_US
dc.typebachelorThesisen_US
ups.carreraIngeniería Electrónica-
ups.sedeSede Guayaquil-
Pertenece a las colecciones: Grado

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UPS-GT001464.pdfTexto completo15,44 MBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons